MHS news and projects – page 3
Browse MHS project stories, equipment updates and workshop guides.
A lift trolley for substation fan maintenance
A mining client needed to remove heavy cooling fans during annual maintenance on a substation. The fans sat around 2.4 metres above ground, with limited space for handling…
→Planning an inspection for a jib crane
A jib crane sees repeated use at the same workstation, often by several operators. A sound inspection plan follows the specific crane, its operating conditions and the…
→Five types of walkie stacker
The main differences between stackers become clear when you look at how the machine approaches a pallet and how far the operator travels.
→How a vacuum lifter works
A vacuum head forms a seal where it meets a load. A pressure difference across that contact area allows the lifting system to hold the material.
→Equipment spotlight on the REID PORTAGANTRY
A portable gantry brings an overhead lifting point to a work area where a permanently installed crane may be impractical. The REID PORTAGANTRY family is one example.
→Choosing a bin lifter for waste handling
A wheeled bin emptied into a larger container presents a different task from moving a loaded industrial bin with a forklift or overhead crane.
→Vacuum lifting applications across industry
A sheet of glass, a timber board and a machined component offer very different surfaces for a lifting head. The contact area is a practical starting point for selecting equipment.
→A drum-based vacuum for the workshop
An industrial vacuum head can turn a standard 205-litre steel drum into a collection vessel. The system uses compressed air.
→Vacuum lifting and lean manufacturing
A useful lean manufacturing question is how often a product is handled on its way through a workstation. Every extra pick, turn or wait is visible when the route is mapped.
→Using a hand stacker in the workplace
A hand stacker combines a movable base with the ability to raise a load for shelving, workstations or pallet handling. It can suit a short transfer where a larger machine would…
→Using task data to review manual handling
Wearable movement sensors are one way to learn where a job involves repeated bending, reaching or awkward movement. The readings can support a workplace handling review.
→Vacuum lifting for sacks and bags
A bag can sag, change shape and present a porous face to the lifting head. Two sacks of equal weight may therefore need different handling equipment.
→








